Quiet Book Page - Peek a Boo Mirror

Quiet Book Page - Peek a Boo Mirror

Sometime after making Ada’s crocodile brushing teeth page and looking into plastic mirrors online I realized I owned one on our baby gym. Next I just had to find a way to use it. I figured a peek-a-boo page for Zoey would be perfect! I noticed the outside edge of my mirror was fabric so I would be able to sew along the edges, hopefully hidden by the mirror edge, to keep it on the page. I was going to use flaps to offer a way to easily hide and show the mirror so Zoey could play peek-a-boo with herself without requiring our help.

Quiet Book Page - Peek a Boo Mirror

Materials

  • Plastic Mirror (from a baby play gym)
  • Flannel that I had on hand from the Duplo Storage Bag and Playmat and the interior of my Peek-a-Boo Television Characters Quilt
  • Seam ripper
  • 108″ Unbleached Muslin Natural Fabric by the Yard – for the page itself
  • Pellon Fusible Thermolam Plus White Fabric by the Yard – for the page itself
  • And of course my sewing machine, thread, and a hand needle

The first step was to prepare the mirror by cleaning the fabric around the mirror with diaper wipes and then using a seam ripper to remove the strap on the back of the mirror that attached the mirror to the baby gym.

I had a plastic mirror that was part of a baby gym. I used a seam ripper to remove the strap on the back.
I had a plastic mirror that was part of a baby gym. I used a seam ripper to remove the strap on the back.

I then centered the mirror on the page and used thread to hand sew it to the page. I had debated using embroidery floss but decided to go with the thread as it was thinner and easier to pull through the fabric on the flower. Because the edge of the mirror extended a bit over the beginning of the flower petals, I was able to tuck my needle and thread under the edge of the mirror before sewing through the petals and thus kept my seams hidden.

I centered the mirror on my page base.
I centered the mirror on my page base.
And then used thread to hand stitch it on along the edge.
And then used thread to hand stitch it on along the edge.
All sewn on.
All sewn on.

My next step was to create the peek-a-boo covers. I chose to sew the top and the bottom of the flap together and used two colors of fabric: grey for the underside and pink for the top side. I wanted to cover up the mirror on all four quadrants so decided to go with four flaps. I measured the mirror, divided the height and width in two, cut the squares, sewed the grey and pink together by sewing it on three sides, flipping them right side out, and then closing up the fourth side.

For the peek-a-boo aspect I used some pink and grey flannel I had and lined it up.
For the peek-a-boo aspect I used some pink and grey flannel I had and lined it up.
I then figured out how wide I wanted the pieces to be and marked it with a pin on either side so I could sew between the pins.
I then figured out how wide I wanted the pieces to be and marked it with a pin on either side so I could sew between the pins.
And then cut it into squares.
And then cut it into squares.

I decided that the side I sewed closed on the outside will be where I sew the flap to the page. I aligned the flaps to cover up the mirror and have a single sewn side of the flap on each side of the mirrors so they’d open up in all four directions. Alternatively, you could make the open just on the sides or from the top and bottom. After pinning them in place I machine sewed them onto the page.

After sewing the flaps and putting them right side out I then pinned them to the page being careful to fully hide the mirror.
After sewing the flaps and putting them right side out I then pinned them to the page being careful to fully hide the mirror.
And then sewed them to the page making sure each one was sewn on their own side.
And then sewed them to the page making sure each one was sewn on their own side.
With the flaps back so you can see the mirror.
With the flaps back so you can see the mirror.

With the page finished all that was left to do was sew the page with it’s reverse side of the page, put right side out, close the page, and then add the grommets. You can read more about how I combined my quiet book pages if you’re interested or you can join them together your own way.

Once the reverse side of the page is done pin them together with the right sides on the inside.
Once the reverse side of the page is done pin them together with the right sides on the inside.
Then sew it closed on three (or more sides) leaving an opening to put it right side out.
Then sew it closed on three (or more sides) leaving an opening to put it right side out.
Put it right side out, close up the hole, and add decorative stitches.
Put it right side out, close up the hole, and add decorative stitches.
And ready to play!
And ready to play!

If I were to do this again I would…

  • Originally I wanted to use a second set of flaps that stretched across to hide the entire set of pink flaps. Somehow I ended up making the flaps shorter than I wanted so I decided to leave them off. If you’re interested the plan was to add four grey rectangles and sew them to the page along all four sides. I was going to fold them together like the top of the box so there was a bit more to the peek-a-boo mirror than just opening and closing the flaps.
I had cut and sewn grey flaps to go over the pink ones but they ended up being too skinny.
I had cut and sewn grey flaps to go over the pink ones but they ended up being too skinny.

You can check out my previous posts if you want more information on how I created my quiet book covers, joined my quiet book pages together, or to see all my completed quiet book pages. I can’t wait to see what you come up with for a peek-a-boo page. Feel free to connect with me through the comments below, post on my Facebook page, or connect with me on Instagram.



Related Posts

Latest Posts